D-Link DFL- 2500 Cli Reference Manual Download Page 182

Page: 182 / 213

3.53. ScheduleProfile

Description

A Schedule Profile defines days and dates and are then used by the various policies in the system.

Properties

Name

Specifies a symbolic name for the service. (Identifier)

Mon

Specifies during which intervals the schedule profile is active on Mondays.
(Optional)

Tue

Specifies during which intervals the schedule profile is active on Tuesdays.
(Optional)

Wed

Specifies during which intervals the schedule profile is active on Wednesdays.
(Optional)

Thu

Specifies during which intervals the schedule profile is active on Thursdays.
(Optional)

Fri

Specifies during which intervals the schedule profile is active on Fridays.
(Optional)

Sat

Specifies during which intervals the schedule profile is active on Saturdays.
(Optional)

Sun

Specifies during which intervals the schedule profile is active on Sundays.
(Optional)

StartDate

The date after which this Schedule should be active. (Optional)

EndDate

The date after which this Schedule is not active anymore. (Optional)

Comments

Text describing the current object. (Optional)

3.53. ScheduleProfile

Chapter 3. Configuration Reference

182

Summary of Contents for DFL- 2500






















































































































































































































Search results

Summary of Contents for DFL- 2500

Reviews:

Related manuals for DFL- 2500

Brands by name

Popular brands

D-Link DFL- 2500, Cli Reference Manual

Search results

Summary of Contents for DFL- 2500

Reviews:

Related manuals for DFL- 2500

Brands by name

Popular brands