D-Link DFL- 2500 Cli Reference Manual Download Page 97

Page: 97 / 213

CacheTimeout

Timeout in seconds before a cached IP address is removed.
(Default: 600)

DNSBlackLists

Specifies the BlackList domain and its weighted value.

Comments

Text describing the current object. (Optional)

3.4.7.1. ALG_SMTP_Email

Description

Used to whitelist or blacklist an email sender/recipient.

Properties

Type

Specifies if the email address is the sender or the recipient. (Default: Sender)

Action

Specifies whether to whitelist (allow) or blacklist (deny) this address. (Default:
Blacklist)

Email

Specifies the recipient email to blacklist or whitelist.

Comments

Text describing the current object. (Optional)

Note

If no

Index

is specified when creating an instance of this type, the object will be

placed last in the list and the

Index

will be equal to the length of the list.

3.4.8. ALG_TFTP

Description

Use an TFTP Application Layer Gateway to manage TFTP traffic through the system.

Properties

Name

Specifies a symbolic name for the ALG. (Identifier)

AllowedCommands

Specifies allowed commands. (Default: ReadWrite)

RemoveOptions

Remove option part from request packet. (Default: No)

AllowUnknownOptions

Allow unknown options in request packet. (Default: No)

MaxBlocksize

Max value for the blksize option. (Optional)

MaxFileTransferSize

Max size for transferred file. (Optional)

BlockDirectoryTraversal

Prevent directory traversal (consecutive dots in filenames).
(Default: No)

Comments

Text describing the current object. (Optional)

3.4.8. ALG_TFTP

Chapter 3. Configuration Reference

Summary of Contents for DFL- 2500






















































































































































































































Search results

Summary of Contents for DFL- 2500

Reviews:

Related manuals for DFL- 2500

Brands by name

Popular brands

D-Link DFL- 2500, Cli Reference Manual

Search results

Summary of Contents for DFL- 2500

Reviews:

Related manuals for DFL- 2500

Brands by name

Popular brands