D-Link DFL- 2500 Cli Reference Manual Download Page 191

Page: 191 / 213

ReassDoneLinger

How long to remember a completed reassembly (watching for
old dups). (Default: 20)

ReassIllegalLinger

How long to remember an illegal reassembly (watching for
more fragments). (Default: 60)

Note

This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.

3.55.8. HWMSettings

Description

General settings for Hardware Monitoring

Properties

EnableSensors

Enable/disable all HWM functionality. (Default: No)

SensorPollInterval

Sensor polling interval. (Default: 500)

MemoryPollInterval

Memory polling interval in minutes. (Default: 15)

MemoryUsePercent

Should mem monitor use percentage as unit for monitoring, else it
is megabyte. (Default: Yes)

MemoryLogRepetition

Should we send a log message for each poll result that is in the
Alert, Critical or Warning level, or should we only send when a
new level is reached. (Default: No)

MemoryAlertLevel

Alert log message if free memory is below this value, disable by us-
ing 0. (Default: 0)

MemoryCriticalLevel

Critical log message if free memory is below this value, disable by
using 0. (Default: 0)

MemoryWarningLevel

Warning log message if free memory is below this value, disable by
using 0. (Default: 0)

Note

This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.

3.55.9. ICMPSettings

Description

Settings related to the ICMP protocol.

Properties

3.55.8. HWMSettings

Chapter 3. Configuration Reference

191

Summary of Contents for DFL- 2500






















































































































































































































Search results

Summary of Contents for DFL- 2500

Reviews:

Related manuals for DFL- 2500

Brands by name

Popular brands

D-Link DFL- 2500, Cli Reference Manual

Search results

Summary of Contents for DFL- 2500

Reviews:

Related manuals for DFL- 2500

Brands by name

Popular brands