D-Link DFL- 2500 Cli Reference Manual Download Page 115

Page: 115 / 213

Note

This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.

3.17.6. MarvellEthernetPCIDriver

Description

Marvell (88E8001,88E8053,88E8062) Fast and Gigabit Ethernet Adaptor.

Properties

Comments

Text describing the current object. (Optional)

Note

This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.

3.17.7. R8139EthernetPCIDriver

Description

RealTek (8139) Fast Ethernet Adaptor.

Properties

Comments

Text describing the current object. (Optional)

Note

This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.

3.17.8. R8169EthernetPCIDriver

Description

RealTek (8169,8110) Gigabit Ethernet Adaptor.

Properties

Comments

Text describing the current object. (Optional)

3.17.6. MarvellEthernetPCIDriver

Chapter 3. Configuration Reference

115

Summary of Contents for DFL- 2500






















































































































































































































Search results

Summary of Contents for DFL- 2500

Reviews:

Related manuals for DFL- 2500

Brands by name

Popular brands

D-Link DFL- 2500, Cli Reference Manual

Search results

Summary of Contents for DFL- 2500

Reviews:

Related manuals for DFL- 2500

Brands by name

Popular brands