D-Link DFL- 2500 Cli Reference Manual Download Page 134

Page: 134 / 213

3.30. Interface

This is a category that groups the following object types.

3.30.1. DefaultInterface

Description

A special interface used to represent internal mechanisms in the system as well as an abstract "any"
interface.

Properties

Name

Specifies a symbolic name for the interface. (Identifier)

Comments

Text describing the current object. (Optional)

3.30.2. Ethernet

Description

An Ethernet interface represents a logical endpoint for Ethernet traffic.

Properties

Name

Specifies a symbolic name for the interface. (Identifier)

The IP address of the interface.

Network

The network of the interface.

DefaultGateway

The default gateway of the interface. (Optional)

Broadcast

The broadcast address of the connected network. (Optional)

PrivateIP

The private IP address of this high availability node.
(Optional)

NOCHB

This will disable sending Cluster Heartbeats from this inter-
face (used by HA to detect if a node is online and working).
(Optional)

MTU

Specifies the size (in bytes) of the largest packet that can be
passed onward. (Default: 1500)

Metric

Specifies the metric for the auto-created route. (Default: 100)

DHCPEnabled

Enable DHCP client on this interface. (Default: No)

DHCPHostName

Optional DHCP Host Name. Leave blank to use default name.
(Optional)

EthernetDevice

Hardware settings for the Ethernet interface.

AutoSwitchRoute

Enable transparent mode, which means that a switch route is

3.30. Interface

Chapter 3. Configuration Reference

134

Summary of Contents for DFL- 2500






















































































































































































































Search results

Summary of Contents for DFL- 2500

Reviews:

Related manuals for DFL- 2500

Brands by name

Popular brands

D-Link DFL- 2500, Cli Reference Manual

Search results

Summary of Contents for DFL- 2500

Reviews:

Related manuals for DFL- 2500

Brands by name

Popular brands