D-Link DFL- 2500 Cli Reference Manual Download Page 153

Page: 153 / 213

3.36. LinkMonitor

Description

The Link Monitor allows the system to monitor one or more hosts and take action if they are un-
reachable.

Properties

Action

Specifies what action the system should take.

Addresses

Specifies the addresses that should be monitored.

MaxLoss

A single host is considered unreachable if this number of consecutive
ping responses to that host are not replied to. (Default: 7)

PingInterval

Milliseconds between each monitor attempt. (Default: 250)

InitGracePeriod

Do not allow triggering of the link monitor for this number of seconds
after the last reconfiguration. (Default: 45)

RoutingTable

Routing table used for link monitoring. (Default: main)

UseSharedIP

Use the shared IP of a HA cluster instead of the private IP of the node.
(Default: No)

Comments

Text describing the current object. (Optional)

Note

If no

Index

is specified when creating an instance of this type, the object will be

placed last in the list and the

Index

will be equal to the length of the list.

3.36. LinkMonitor

Chapter 3. Configuration Reference

153

Summary of Contents for DFL- 2500






















































































































































































































Search results

Summary of Contents for DFL- 2500

Reviews:

Related manuals for DFL- 2500

Brands by name

Popular brands

D-Link DFL- 2500, Cli Reference Manual

Search results

Summary of Contents for DFL- 2500

Reviews:

Related manuals for DFL- 2500

Brands by name

Popular brands