D-Link DES-3028, User Manual

Page: 226 / 333

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
Reauthenticate Port(s) for Port Based 802.1X
This window allows reauthentication of a port or group of ports by using the pull-down menus
From
and
To
and clicking
Apply
.
The
Reauthenticate Port Table
displays the current status of the reauthenticated port(s) once
Apply
has been clicked
.
Click
Security > 802.1X > Reauthenticate Port(s)
to open the
Reauthenticate Port(s)
window:
Figure 10- 30. Reauthenticate Port and Reauthenticate Port Table window
This window displays the following information:
Parameter Description
Port The port number of the reauthenticated port.
Auth State The Authenticator State will display one of the following:
Initialize, Disconnected, Connecting,
Authenticating, Authenticated, Aborting, Held, ForceAuth, ForceUnauth,
and
N/A.
BackendState The Backend State will display one of the following:
Request, Response, Success, Fail, Timeout,
Idle, Initialize,
and
N/A.
OperDir The status of the administrative-controlled direction, either
In
or
Both
.
NOTE: The user must first globally enable 802.1X in the DES-30xx Web
Management Tool window before initializing ports. Information in the
Initialize Ports Table cannot be viewed before enabling 802.1X.
212