D-Link DES-3028, User Manual

Page: 47 / 333

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
Port Description
The Switch supports a port description feature
where the user may name various ports on the
Switch. To assign names to various ports, click
Administration
>
Port Configuration
>
Port
Description
to view the following window:
Use the
From
and
To
pull-down menu to choose a
port or range of ports to describe, and then enter a
description of the port(s). Click
Apply
to set the
descriptions in the
Port Description Table
.
The
Medium Type
applies only to the Combo
ports. If configuring the Combo ports this defines
the type of tranport medium being configured. SFP
ports should be nominated
Fiber and the Combo
1000BASE-T ports should be nominated Copper .
The result will be displayed in the appropriate
switch port number slot (
C
for copper ports and
F
for fiber ports).
Figure 6- 4. Port Description window
Port Error Disabled
The following window will display the information about ports that have had their connection status disabled, for reasons such as
STP loopback detection or link down status. To view this window, click
Administration
>
Port Configuration > Port Error
Disabled
.
Figure 6- 5. Port Error Disabled window
The following parameters are displayed:
33