D-Link DES-3028, User Manual

Page: 78 / 333

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
The following parameters can set:
Parameter Description
Host IP Address Type the IP address of the remote management station that will serve as the SNMP host
for the Switch.
SNMP Version
V1
- To specifies that SNMP version 1 will be used.
V2
- To specify that SNMP version 2 will be used.
V3-NoAuth-NoPriv
- To specify that the SNMP version 3 will be used, with a NoAuth-
NoPriv security level.
V3-Auth-NoPriv
- To specify that the SNMP version 3 will be used, with an Auth-NoPriv
security level.
V3-Auth-Priv
- To specify that the SNMP version 3 will be used, with an Auth-Priv security
level.
Community String/
SNMP V3 User Name Type in the community string or SNMP V3 user name as appropriate.
To implement your new settings, click
Apply.
To return to the
SNMP Host Table
, click the Show All SNMP Host Table Entries
link.
SNMP Engine ID
The Engine ID is a unique identifier used for SNMP V3 implementations. This is an alphanumeric string used to identify the
SNMP engine on the Switch. To display the Switch's SNMP Engine ID, click
Administration
>
SNMP Manger > SNMP
Engine ID
.
Figure 6- 42. SNMP Engine ID Configuration window
To change the Engine ID, type the new Engine ID in the space provided and click the
Apply
button.
64