D-Link DES-3028, User Manual, Page: 228 / 333

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
Parameter Description
RADIUS Timeout (1-
255 Sec) This field is used to set the time the Switch will wait for a response from the Radius Server. The
user may set a time between
0
and
255
seconds. The default setting is
5
seconds.
Radius Retransmit
(1-255) Enter the value in the Radius Retransmit field to change how many times the device will resend
an authentication request when the Radius server timeout occurs. The default setting is
2
seconds.
Succession Choose the desired RADIUS server to configure:
First, Second
or
Third
.
RADIUS Server Set the RADIUS server IP.
Authentic Port Set the RADIUS authentic server(s) UDP port. The default port is
1812
.
Accounting Port Set the RADIUS account server(s) UDP port. The default port is
1813
.
Key
Set the key the same as that of the RADIUS server.
Confirm Key Confirm the shared key is the same as that of the RADIUS server.
Status This allows users to set the RADIUS Server as
Valid
(Enabled) or
Invalid
(Disabled).
Trusted Host
To view the Trusted Host settings on the switch, click
Security
>
Trusted Host
.
Figure 10- 33. Trusted Host window
Use the Security IP Management to permit remote stations to manage the Switch. If one or more designated management stations
are chosen to define, only the chosen stations, as defined by their IP addresses, will be allowed management privileges through the
web manager, the Telnet session or the SNMP manager. To manage the Switch the user must enter the IP address or the IP
submask and then click the
Apply
button to implement the setting. To remove an individual security IP address from the Switch
click the corresponding button under the delete heading. To remove all security IP addresses from the Switch, click the
button.
This window displays the following information:
Parameter Description
Add Trusted Host IP Enter an IP Address or a list of IP Addresses including your own that will be given permission to
access the Switch.
214