D-Link DES-3028, User Manual

Page: 231 / 333

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
Parameter Description
Application Lists the configuration applications on the Switch. The user may configure the Login Method
List and Enable Method List for authentication for users utilizing the Console (Command
Line Interface) application, the Telnet application, SSH and the WEB (HTTP) application.
Login Method List Using the pull-down menu, configure an application for normal login on the user level,
utilizing a previously configured method list. The user may use the default Method List or
other Method List configured by the user. See the
Login Method Lists window, in this
section, for more information.
Enable Method List Using the pull-down menu, configure an application for normal login on the user level,
utilizing a previously configured method list. The user may use the default Method List or
other Method List configured by the user. See the
Enable Method Lists window, in this
section, for more information
Click
Apply
to implement changes made.
Authentication Server Group
This window will allow users to set up Authentication Server Groups on the Switch. A server group is a technique used to group
TACACS/XTACACS//RADIUS server hosts into user-defined categories for authentication using method lists. The
user may define the type of server group by protocol or by previously defined server group. The Switch has four built-in Authenti-
cation Server Groups that cannot be removed but can be modified. Up to eight authentications server hosts may be added to any
particular group.
To view the following window, click
Security > Access Authentication Control > Authentication Server Group
:
Figure 10- 36. Authentication Server Group window
This window displays the Authentication Server Groups on the Switch. To modify a particular group, click its hyperlinked Group
Name, which will then display the following window.
217