D-Link DES-3028, User Manual

Page: 139 / 333

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
MST Configuration Identification
The following windows in the
MST Configuration Identification
section allow the user to configure a MSTI instance on the
Switch. These settings will uniquely identify a multiple spanning tree instance set on the Switch. The Switch initially possesses
one
CIST or Common Internal Spanning Tree of which the user may modify the parameters for but cannot change the MSTI ID
for, and cannot be deleted. To view the
MST Configuration Identification
window, click
L2 Features > Spanning Tree > MST
Configuration Identification
.
Figure 7- 38. MST Configuration Identification window
The window above contains the following information:
Parameter Description
Configuration Name A previously configured name set on the Switch to uniquely identify the MSTI (Multiple
Spanning Tree Instance). If a configuration name is not set, this field will show the MAC
address to the device running MSTP.
Revision Level This value, along with the Configuration Name will identify the MSTP region configured on
the Switch. The user may choose a value between
0
and
65535
with a default setting of
0
.
MSTI ID This field shows the MSTI IDs currently set on the Switch. This field will always have the
CIST MSTI, which may be configured but not deleted. Clicking the hyperlinked name will
open a new window for configuring parameters associated with that particular MSTI.
VID List This field displays the VLAN IDs associated with the specific MSTI.
Clicking the
Add
button will reveal the following window to configure:
Figure 7- 39. Instance ID Settings window – Add
125