D-Link DES-3028, User Manual

Page: 15 / 333

DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch

RFC1493 Bridge

RFC2819 RMON

RFC2665 Ether-like MIB

RFC2863 Interface MIB

Private MIB

RFC2674 for 802.1p

IEEE 802.1X MIB

IEEE 802.3x flow control in full duplex mode

IEEE 802.1p Priority Queues

IEEE 802.3u 100BASE-TX compliant

RS-232 DCE console port for Switch management

Provides parallel LED display for port status such as link/act, speed, etc.

IEEE 802.3 10BASE-T compliant

High performance switching engine performs forwarding and filtering at wire speed, maximum 14,881 packets/sec
on each 10Mbps Ethernet port, maximum 148,810 packet/sec on 100Mbps Fast Ethernet port and 1,488,100 for each
Gigabit port

Full and half-duplex for both 10Mbps and 100Mbps connections. Full duplex allows the switch port to
simultaneously transmit and receive data. It only works with connections to full-duplex-capable end stations and
switches. Connections to a hub must take place at half-duplex

Support Broadcast/Multicast storm control

Non-blocking store and forward switching scheme capability to support rate adaptation and protocol conversion

Supports by-port Egress/Ingress rate control

Efficient self-learning and address recognition mechanism enables forwarding rate at wire speed
2