D-Link DCS-6220G User Manual Download

Page: 75 / 145

DCS-660G User’s Manual

D-Link Systems, Inc.

Using IP surveillance Software

When Launcher is locked, the unlock window will appear, prompting for the user password in order to

unlock.

The input area of the dialog will be grayed (disabled) for 60 seconds after 3 consecutive failures.

User Interface

Below is the user interface for Launcher:

The main user interface for Launcher is an icon on system tray, and the popup menu appears when the

user clicks on the icon. The menu items are listed below:

Lock Launcher

When this item is selected, Launcher will enter lock mode. In lock mode, whenever users want to

invoke the menu, a dialog asking for ID and password will appear. The interface for this dialog is

covered in the previous section.



Launcher

(continued)

Summary of Contents for DCS-6220G


















































































































































Search results

Summary of Contents for DCS-6220G

Reviews:

Related manuals for DCS-6220G

Brands by name

Popular brands

D-Link DCS-6220G, User Manual

Search results

Summary of Contents for DCS-6220G

Reviews:

Related manuals for DCS-6220G

Brands by name

Popular brands