D-Link DCS-6220G, User Manual

Page: 55 / 145

55
DCS-660G User’s Manual
D-Link Systems, Inc.
Using the DCS-660G with an Internet Browser
Configuration > Advanced > Camera Control (continued)
Current Position:
Enter a name for the position at which you would like to preset the
DCS-6620G. Click Add to add the new preset position to the Preset
Locations list.
Preset Position:
Using the pull down menu, you can delete a preset position by selecting
it and clicking Delete.
Dwelling Time:
Set the value of time that the camera will remain on each preset
position before moving to the next. The dwelling time can be set
between 1 and 55 seconds.
Patrol Selection:
To use the Auto Patrol feature, select the desired preset positions from
the Preset Locations list and add them to the Selected Locations
list by clicking Select
. You can then select the order in which
the camera will patrol through the preset locations by selecting
a location and clicking UP or DN. Click Remove to remove a
location from the list.
Click Apply to make
changes effective
Enable IR Control:
Click this to allow the DCS-6620G to be controlled by the included
remote.
Zoom times display:
Checking this box allows the Administrator to display the zoom
magnitude on the transmitted video.
Save:
The button is valid for “Pan speed”, “Tilt speed”, “Tilt speed”, “Auto
pan/patrol speed”, “Enable IR control”, “Dwelling time” and “Patrol
selection”. In other words, after changing these settings, and the
“Save” button is not clicked, the new setting of the camera will not
take effect.