D-Link DCS-6220G User Manual Download

Page: 22 / 145

DCS-660G User’s Manual

D-Link Systems, Inc.

Installing IP surveillance Software

Real-time Monitoring

Video and Audio Recording to hard disk

High quality video

High compression ratio

Maximum of 16 cameras with different monitor layouts

Smart playback

Triggered event browsing

Fast database searching

Configurable automated alarms

Account password protection

Scheduled recording for each camera

AVI file export

Motion detection for each camera

The IP surveillance Software on the CD included with the DCS-6620G 80.11g PTZ Internet Camera

converts the DCS-6620G into a powerful, yet flexible, surveillance system for home or business, with

the following features:

To install the IP surveillance software, click on IP surveillance on the CD included with the 80.11g PTZ

Internet Camera. The Welcome screen appears:

















Installing IP Surveillance Software

Click Next

Summary of Contents for DCS-6220G


















































































































































Search results

Summary of Contents for DCS-6220G

Reviews:

Related manuals for DCS-6220G

Brands by name

Popular brands

D-Link DCS-6220G, User Manual

Search results

Summary of Contents for DCS-6220G

Reviews:

Related manuals for DCS-6220G

Brands by name

Popular brands