D-Link DCS-6220G User Manual Download

Page: 66 / 145

DCS-660G User’s Manual

D-Link Systems, Inc.

Record Snapshots to your FTP server with Motion Detection

John Smith

13.13.13.1

Snapshot

Next, click the Mail & FTP button under the Advanced tab to set the FTP server settings for the DCS-

6620G.

In this window, enter the settings for the FTP server you wish to record to. Optionally, you can enter

settings for a secondary backup FTP server.

Local FTP server port:

The Default port is 1. To connect to an FTP server, it is recommended

that you do not change the port number unless your camera is behind

a router. If your camera is behind a router, you can assign any port

number to this field, but you must enable port forwarding on the

router. Please refer to your router manual for more information on

port forwarding.

1st FTP server:

If you are going to upload snapshots to an FTP server, you will need

to fill in the Domain name or IP address of your external FTP server

such as ftp://dlink.com or ftp://13.13.13.1. (The server name

and IP address will vary depending on the user.) The following user

settings must be correctly configured for remote access.

Click Mail & FTP

Summary of Contents for DCS-6220G


















































































































































Search results

Summary of Contents for DCS-6220G

Reviews:

Related manuals for DCS-6220G

Brands by name

Popular brands

D-Link DCS-6220G, User Manual

Search results

Summary of Contents for DCS-6220G

Reviews:

Related manuals for DCS-6220G

Brands by name

Popular brands