D-Link DCS-6220G User Manual Download

Page: 34 / 145

DCS-660G User’s Manual

D-Link Systems, Inc.

Using the DCS-660G with an Internet Browser

Open your Internet Explorer Web browser and enter the IP address for your 80.11g PTZ Internet

Camera.

In the example, this address is 19.168.0.10. Your address may differ.

If you are following this manual in the order it is presented, you should now have an operating DCS-

6620G 80.11g PTZ Internet Camera configured with the Installer program. You also have installed the

IP surveillance software from the CD. This section of the manual will deal with using the 80.11g PTZ

Internet Camera in two parts:



Using the DCS-6620G with an Internet browser and accessing the screens to control

and monitor the camera.



Using the IP surveillance software with the DCS-6620G.

Using the DCS-6620G with an Internet

Browser

Summary of Contents for DCS-6220G


















































































































































Search results

Summary of Contents for DCS-6220G

Reviews:

Related manuals for DCS-6220G

Brands by name

Popular brands

D-Link DCS-6220G, User Manual

Search results

Summary of Contents for DCS-6220G

Reviews:

Related manuals for DCS-6220G

Brands by name

Popular brands