D-Link DCS-6220G User Manual Download

Page: 44 / 145

DCS-660G User’s Manual

D-Link Systems, Inc.

Using the DCS-660G with an Internet Browser

Click the DDNS & UPnP button from the Configuration screen to access DDNS & UPnP settings.

Configuration > Advanced > DDNS & UPnP

Dynamic DNS (DDNS)

Dynamic DNS (Domain Name Service) is a method of keeping a domain name linked to a changing

(dynamic) IP address. With most Cable and DSL connections, you are assigned a dynamic IP address

and that address is used only for the duration of that specific connection. With the DCS-6620G, you can

setup your DDNS service and the DCS-6620G will automatically update your DDNS server every time it

receives a different IP address. Depending on the service, this update may take a few hours.

Click DDNS & UPnP

Summary of Contents for DCS-6220G


















































































































































Search results

Summary of Contents for DCS-6220G

Reviews:

Related manuals for DCS-6220G

Brands by name

Popular brands

D-Link DCS-6220G, User Manual

Search results

Summary of Contents for DCS-6220G

Reviews:

Related manuals for DCS-6220G

Brands by name

Popular brands