D-Link DCS-6220G, User Manual

Page: 68 / 145

68
DCS-660G User’s Manual
D-Link Systems, Inc.
Record Snapshots to your FTP server with Motion Detection
Next, click the Applications button under the Tools tab to set the application settings for the DCS-
6620G.
In this window, follow the steps below to set the application settings for snapshots to be recorded to an
FTP site:

Select the weekdays you would like to record and enter the “Snapshots begin” time
and “Snapshots end” time for the weekly schedule, or select “All the time except for
the above schedule” if you want to enable full time snapshot recording.

Check “Event operation.”

Set the delay “before detecting next event” to avoid continuous false alarms
following the original event.

Set the delay to “take snapshots after event” to capture the direction of the moving
object.

Check the window name (in this case Lab).

Check “Upload snapshots while motion detected.”

Click “Send snapshots by FTP” and check “FTP put snapshots with date and time
suffix”

Click the “Apply” button to save the settings.
Click the apply button when finished. You are now able to record snapshots to your FTP server when
motion detection is triggered.
Click Applications