manualshive.com logo in svg

D-Link DCS-6220G, User Manual

Share
Download
D-Link DCS-6220G User Manual Download Page 48

48

DCS-660G User’s Manual 

D-Link Systems, Inc.

Using the DCS-660G with an Internet Browser

Click the Audio/Video button from the Configuration screen to access video settings that affect how the 

video image appears.

Configuration > Advanced > Audio

Click Audio

There are five options to select. For all the modes, only one client can 

talk to the server at the same time.

In this mode, the User can talk to the server while listening sound from 

the server simultaneously.

In this mode, the User can talk to the server or listen from the server, 

but not at the same time.

In this mode, the User can only talk to the server.

In this mode, the User can only listen from the server.
In this mode, the audio is disabled in both directions.

Transmission Mode:

Full Duplex 

(Talk and listen 

Simultaneously):

Half Duplex 

(Talk or listen, not at the 

same time):

Simplex- Talk only:

Simplex- Listen only:

Disable:

Summary of Contents for DCS-6220G


















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands