manualshive.com logo in svg

D-Link DCS-6220G, User Manual

Share
Download
D-Link DCS-6220G User Manual Download Page 45

45

DCS-660G User’s Manual 

D-Link Systems, Inc.

Using the DCS-660G with an Internet Browser

Configuration > Advanced > DDNS & UPnP 

(continued)

UPnP

UPnP is short for Universal Plug and Play, which is a networking architecture that provides compatibility 

among networking equipment, software, and peripherals. The DCS-6620G is a UPnP enabled 80.11g 

PTZ Internet Camera. If your operating system is UPnP enabled, the device will be easier to configure. If 

you do not want to use the UPnP functionality, it can be disabled by unselecting “Enable UPnP”.

Click 

Apply

 to make  

changes effective

Click to enable the DDNS function.

Select your Dynamic DNS provider from the pull down menu.

Enter the host name of the DDNS server. 

Enter your username or e-mail used to connect to the DDNS server.

Enter your password or key used to connect to the DDNS server.

Enable DDNS:

Provider:

Host name:

Username/E-mail:

 

Password/Key:

 

Summary of Contents for DCS-6220G


















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands