D-Link DCS-100, User Manual

Page: 82 / 170

82 D-Link D-ViewCam User Manual
Section 3 - Configuration
DI/DO
Use to trigger Digital Input/Output devices that are connected to the camera(s), such as alarm lights and sirens.
Step 1:
Select the
DI/DO
action and then click
OK
.
Step 2: Select Digital Input Module and then click the “DI/DO” indicator to modify the setting.
Step 3:
Select the device that is connected to your system, that is, the PC you are working with. You can enable the Automatically popup
I/O control panel check box to obtain the correspondent panel to monitor the I/O status.
You should adjust the setting of I/O device in
General Setting and Utilities
>
Setting
>
I/O Device
first, the I/O control panel will display
the device status based on it. You can also adjust the size of the panel by dragging a mouse or click the on the right top of the
display window.