D-Link DCS-100 User Manual Download Page 131

Page: 131 / 170

131

D-Link D-ViewCam User Manual

Section 4 - FAQs

7. How do I set multiple storage paths for video recording?

Our Main Console allows you to set up several hard disk drives as the storage location. When the first hard disk is almost full

(the capacity is less than 800MB on system disks or 100MB on non-system disks), Main Console will try to find a second storage

with enough capacity.

If no more capacity is available, Main Console will start recycling if auto-recycling is enabled.

If auto-recycling is not enabled, recording will stop.

Please go to

[Main Console]

[Config]

[General]

[Storage Location]

to modify your settings.

Step 3:

Click on

[Camera settings]

. And then you can change

the frame rate, the resolution, the quality, etc.

Summary of Contents for DCS-100











































































































































































Search results

Summary of Contents for DCS-100

Reviews:

Related manuals for DCS-100

Brands by name

Popular brands

D-Link DCS-100, User Manual

Search results

Summary of Contents for DCS-100

Reviews:

Related manuals for DCS-100

Brands by name

Popular brands