D-Link DAP-1360 User Manual Download Page 12

Page: 12 / 270

DAP-1360

Wireless N300 Access Point & Router

User Manual

Overview

Delivery Package

The following should be included:

•

Access point DAP-1360

•

Power adapter DC 12V/0.5A

•

Ethernet cable (CAT 5E)

•

Two detachable antennas

•

“

Quick Installation Guide

” (brochure).

The “

User Manual

” and “

Quick Installation Guide

” documents are available on D-Link website

(see

www.dlink.ru

DAP-1360/A/E1

product page, the downloads tab).

Using a power supply with a different voltage rating than the one included will cause
damage and void the warranty for this product.

Page

of 270

Summary of Contents for DAP-1360















































































































































































































































































Search results

Summary of Contents for DAP-1360

Reviews:

Related manuals for DAP-1360

Brands by name

Popular brands

D-Link DAP-1360, User Manual

Search results

Summary of Contents for DAP-1360

Reviews:

Related manuals for DAP-1360

Brands by name

Popular brands