D-Link DAP-1360 User Manual Download Page 34

Page: 34 / 270

DAP-1360

Wireless N300 Access Point & Router

User Manual

Installation and Connection

Notifications and System Drop-down Menu

The access point's web-based interface displays the notifications in the top right part of the page.

Figure 23. The web-based interface notifications.

Click the icon displaying the number of notifications to view the complete list and click the relevant
link.

Note that you should regularly save the changes of the

access point

's settings to the non-

volatile memory.

You can save the access point's settings via the menu displayed when the mouse pointer is over the

System

caption in the top left part of the page. Also the

System

menu allows you to reboot the

device, create and load the configuration backup, restore the factory defaults, update the firmware,
disable/enable the WLAN.

Figure 24. The

System

menu in the top part of the page.

Control

Description

Save

Click the icon to save new settings to the non-volatile memory.

Also you can save the device's parameters via the

Save

button on

the

System / Configuration

page.

Page

of 270

Summary of Contents for DAP-1360















































































































































































































































































Search results

Summary of Contents for DAP-1360

Reviews:

Related manuals for DAP-1360

Brands by name

Popular brands

D-Link DAP-1360, User Manual

Search results

Summary of Contents for DAP-1360

Reviews:

Related manuals for DAP-1360

Brands by name

Popular brands