DAP-1360
Wireless N300 Access Point & Router
User Manual
Configuring Device (Router Mode)
UPnP IGD
On the
Advanced / UPnP
IGD
page, you can enable the UPnP IGD protocol. The access point
uses the UPnP IGD protocol for automatic configuration of its parameters for network applications
requiring an incoming connection to the access point.
Figure 183. The
Advanced / UPnP IGD
page.
If you want to manually specify all parameters needed for network applications, deselect the
Enabled
checkbox and click the
Apply
button.
If you want to enable the UPnP IGD protocol in the access point, select the
Enabled
checkbox and
click the
Apply
button.
When the protocol is enabled, the access point's parameters configured automatically are displayed
on the page:
Parameter
Description
Protocol
A protocol for network packet transmission.
IP
The IP address of a client from the local area network.
Private port
A port of a client's IP address to which traffic is directed from a
public port of the access point.
Public port
A public port of the access point from which traffic is directed to a
client's IP address.
Comments
Information transmitted by a client's network application.
Page
236
of 270
