DAP-1360
Wireless N300 Access Point & Router
User Manual
Configuring Device (Router Mode)
Parameter
Description
Source IP address
The source host/subnet IP address.
To choose a device connected to the LAN of the access point at the
moment, select the relevant IP address from the drop-down list (the
field will be filled in automatically).
If you want to specify a range of IP addresses, click the icon
(
Range
) and enter the starting and ending addresses in the left and
right fields correspondingly.
Destination IP address
The destination host/subnet IP address.
To choose a device connected to the LAN of the access point at the
moment, select the relevant IP address from the drop-down list (the
field will be filled in automatically).
If you want to specify a range of IP addresses, click the icon
(
Range
) and enter the starting and ending addresses in the left and
right fields correspondingly.
Ports
Source port
A port of the source IP address. You can specify one port, several
ports separated by a comma, or a range of ports separated by a colon.
Destination port
A port of the destination IP address. You can specify one port,
several ports separated by a comma, or a range of ports separated by
a colon.
Click the
Apply
button.
To edit a rule for IP filtering, click the link to the relevant rule. On the opened page, change the
needed parameters and click the
Apply
button.
To remove a rule, select the checkbox located to the left of the relevant line in the table and click
the
Delete
button. Also you can remove a rule on the editing page.
To remove all rules from this page, click the
Clear all
button (the button is displayed if at least one
rule exists).
Page
246
of 270
