SK-91464A-100PMC
FR Family MB91460 Series, Flash Programming, Doc. No. 002-05153 Rev. *A
43
Table 8-1: Jumper setting on starterkit SK-91464A-100PMC
Jumper
Setting
Description
JP6 (UART”B”RxD)
Closed
SIN4 of the MCU is
connected to UART”B”
JP8 (UART”B”TxD)
Closed
SOT4 of the MCU is connected to UART”B”
If your programming software needs connection of RTS and CTS or if it generates reset signal on RTS or DTR
line, refer to the following jumper list:
Table 8-2: Jumper settings for reset signal on starterkit SK-91464A-100PMC
Jumper
Setting
Description
JP32 (RTS-CTS)
Closed
RTS and CTS of X5 are connected
Open
RTS and CTS of X5 are not connected
JP4
(UART”A”/”B”)
2-3
UART”B” is used to generate Reset
JP5 (DTR / RTS “B”)
1-2
DTR of UART”B” is selected
2-3
RTS of UART”B” is selected
JP24 (Main Reset)
Closed
External Reset generation is active
JP35 (Polarity)
1-2
No negation for the DTR/RTS signal
2-3
DTR/RTS signal is negated
