FR Family MB91460 Series, Flash Programming, Doc. No. 002-05153 Rev. *A
37
7. SK-91460-MAIN with SK-91460-
91F467D-208PFV
This chapter describes the needed settings for programming the MB91F465D or MB91F467D on the starterkit
SK-91460-MAIN with adapter board SK-91460-91F467D-208PFV.
The SK-91460-MAIN is a multifunctional evaluation board that has to be used together with the emulator system
or a separated microcontroller board for the Cypress 32-bit microcontroller of MB91460 Series.
The SK-91460-91F467D-208PFV was build as an adapter board that can be used together with the SK-91460-
MAIN. It is also possible to use the SK-91460-91F467D-208PFV as a stand-alone system with some limitations.
The board allows the designer immediately to start with the software development before his own final target
system is available.
The SK-91460-91F467D-208PFV supports the MB91F465D and MB91F467D in the QFP208 packages.
To program the flash memory of the microcontroller there are two ways in this combination. You can use the
SUB-D9 connector on the main board or on the adapter board. The second method can also be used if the
adapter board is used as standalone system.
7.1
Connection to SK-91460-MAIN
Figure 7-1: Connection to main board
