SK-91F467D-208PFV (-GPIO) / SK-91F467-FlexRay
FR Family MB91460 Series, Flash Programming, Doc. No. 002-05153 Rev. *A
35
Table 6-1: Jumper setting on starterkit SK-91F467D-208PFV
Jumper
Setting
Description
JP60
1-2 closed
MCU SIN4 connected to RS-232 transceiver
JP65
1-2 closed
MCU SOT4 connected to RS-232 transceiver
JP69
1-2 closed
X4 pin2 is connected to RS-232 transceiver
If your programming software needs connection of RTS and CTS or if it generates reset signal on RTS or DTR
line, refer to the following jumper list:
Table 6-2: Jumper settings for reset signal on starterkit SK-91F467D-208PFV
Jumper
Setting
Description
JP58
closed
RTS and CTS is shortcut at connector X4
open
RTS and CTS is not shortcut at connector X4
JP64
1-2 closed
DTR can be used for system reset
2-3 closed
RTS can be used for system reset
JP57
3-4 closed
Reset will be done via UART4
JP29
1-2 closed
No polarity inversion for the DTR/RTS signal
2-3 closed
Polarity inversion for the DTR/RTS signal
