FR Family MB91460 Series, Flash Programming, Doc. No. 002-05153 Rev. *A
20
5. GALEP-Programmer
This chapter explains the usage of the ‘GALEP-4’ and ‘GALEP-5’ programmer for serial synchronous/
asynchronous programming and parallel programming of the MB91460 series flash devices.
5.1
GALEP-4
GALEP-
4 Programmer is a third party tool developed by ‘Conitec’ (www.conitec.com).
This programmer allows parallel as well as serial programming of several Cypress microcontrollers.
In case of parallel programming, different socket-adapters are available, depending on the microcontroller family
and device package.
In case of serial programming both synchronous and asynchronous modes are supported. For serial-
synchronous programming an optional ISP-adapter is offered. For serial-asynchronous programming the
programmer itself behaves like a dongle, the programming is done directly via the PC’s COM-port connected to
the microcontroller.
The GALEP-4 is a PC-controlled programmer using the parallel-port (LPTx). It can be powered by an external
power-supply (12V, 400mA) but also by accumulators (6x Type AAA NiMh 1.2V).
Figure 5-1: Conitec GALEP-4 Programmer
