CYUSB3KIT-001 EZ-USB FX3 Development Kit Guide, Doc. #: 001-70237 Rev. *C
13
Getting Started
3. Accept the license agreements for the various software components and click
Next
and
wait till
the installation is complete.
Figure 2-6. Installation Progress Showing Individual Modules
2.3
Rolling Back to a Previous Version of FX3 SDK
You can roll back to any previous version of FX3 SDK using Cypress Update Manager. Use the
steps given in the
Knowledge Base article
to install any previous version.
2.4
FX3 SDK Installation on Linux OS
FX3 SDK version 1.2 and later revisions support firmware development with the Eclipse IDE and
debugging using the J-Link JTAG debugger probe on a Linux platform. The
EZ-USB FX3 SDK for
Linux
is released in the form of a gzipped tar archive called “
FX3_SDK.tar.gz
”. On extraction, this tar
archive contains the following gzipped tar archives:
■
FX3_Firmware.tar.gz: The FX3 firmware library and examples.
■
ARM_GCC.tgz: Sourcery ARM GNU toolchain to compile firmware examples.
■
eclipse_x86.tgz: Eclipse IDE for 32-bit Linux OS.
■
eclipse_x64.tgz: Eclipse IDE for 64-bit Linux OS.
■
cyusb_linux_<Build_no>.tar.gz: The CyUSB Suite provides QT based USB applications to
communicate with FX3 device.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
