CYUSB3KIT-001 EZ-USB FX3 Development Kit Guide, Doc. #: 001-70237 Rev. *C
17
Getting Started
5. To build a FX3 project, select the project in the
Project Explorer
window and click the
Build
button (hammer) in the Eclipse IDE. You can choose whether you want to build a
Debug
version
or a
Release
version of the firmware. The size of the generated image file in the Release version
is smaller than that in the debug version.
Figure 2-12. Build an FX3 project
2.5.3
Tweak Eclipse IDE Settings
Most IDE’s default to automatically saving edited source files before compiling, but the Eclipse
default is not to do so. If you forget to save a file after editing it before a re-compile and wonder why
your edits did not “take”, you will want to have Eclipse automatically save your edits before building
the project. Navigate to
Windows > Preferences > General > Workspace
and select
Save
automatically before build
(
Figure 2-13
).
Figure 2-13. Tell Eclipse to Automatically Save
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
