CYUSB3KIT-001 EZ-USB FX3 Development Kit Guide, Doc. #: 001-70237 Rev. *C
51
Kit Operation
Figure 3-19. Select SPI Interface Using Jumpers (J101–J104)
Note
The white arrows on the DVK board indicate pin1 of the corresponding jumper.
5. In the USB Control Center, select
Program > FX3 > SPI FLASH
. The USB Control Center
application downloads the Serial Flash programming code, and the FX3 DVK board reconnects
to USB as
Cypress USB BootProgrammer
, as shown in
Figure 3-21
.
Figure 3-20. Select SPI Flash Download in Control Center
Figure 3-21. Device after Programmer Firmware Update
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
