PSoC® 4000S Prototyping Kit Guide, Doc. # 002-11504 Rev. *A
48
A.4
Programming the PSoC 4000S Prototyping Kit Using Miniprog3/
KitProg2
The target board allows you to program the PSoC 4000S/EZ-BLE PRoC Module using a MiniProg3
or an external KitProg2 device via the 10-pin JTAG header or the 5-pin SWD header. To do this,
connect wires or a 5-pin 100-mil spaced header to J5 or a 10-pin JTAG header to J11 on the target
board. The PSoC 4000S Prototyping Kit supports both power cycle and reset programming modes.
Figure A-23. Connecting CY8CKIT-145-40XX to MiniProg3
Note:
CY8CKIT-002 MiniProg3
is not part of the PSoC 4000S Prototyping Kit contents and can be
purchased from the
Cypress Online Store
.