PSoC® 4000S Prototyping Kit Guide, Doc. # 002-11504 Rev. *A
38
A.1.2.8
User and Passive Inputs
User Button
The target PSoC 4000S Prototyping board contains a single push button (
SW2
) connected to the
P0[7] pin on the PSoC 4000S device. It is also connected to P4[1] pin on the EZ-BLE PRoC module.
This button can be used for general user inputs or to control different states in an application
including waking up the device from sleep or deep sleep.
Figure A-9. User Button on the Board
Reset Button
The Kit contains a push button (SW1) connected to the XRES pins on the target PSoC 4000S and
EZ-BLE devices. When this button is pressed, the XRES lines of the PSoC 4000S and EZ-BLE are
connected to ground, which, in turn, resets the devices.
Figure A-10. Reset Button