PSoC® 4000S Prototyping Kit Guide, Doc. # 002-11504 Rev. *A
28
A.
Appendix
A.1
Hardware Functional Description
A.1.1
Board Details
The PSoC 4000S Prototyping board consists of the following:
■
PSoC 4000S device U2 (CY8C4045AZI-S413)
■
PSoC 4000S I/O headers J1 and J2
■
10-pin program/debug header J11 (footprint only)
■
KitProg2 (PSoC 5LP) device U1 (CY8C5868LTI-LP039)
■
KitProg2 I/O headers J6 and J7
■
5-pin SWD connection headers J4 and J5
■
PCB USB finger connector J8
■
EZ-BLE™ PRoC™ Module U4
■
One DPDT switch SW4 to select the SWD target device
■
One blue LED LED1 (User)
■
One amber LED LED2 (Power)
■
One amber LED LED3 (KitProg2 Status)
■
User push button SW2 connected to GPIO of PSoC 4000S and EZ-BLE devices
■
Reset button SW1 connected to XRES pin of PSoC 4000S and EZ-BLE devices
■
User push button SW3 connected to GPIO of KitProg2
■
Current measurement jumper J3 (footprint only)
■
External reference capacitor C3 - SAR ADC bypass (No Load by default)
■
CapSense capacitors (CMOD C10, CTANK C13, CintA C36, CintB C35)
■
CapSense sensors (three buttons BTN0, BTN1, and BTN2; one linear slider with five segments
SLD0, SLD1, SLD2, SLD3, and SLD4)
■
LEDs corresponding to CapSense Buttons (LED9, LED10, and LED11) and Slider (LED4, LED5,
LED6, LED7, and LED8)
■
LED12 for EZ-BLE
■
Perforated snappable board design
■
Overlay on CapSense buttons and slider
