PSoC® 4000S Prototyping Kit Guide, Doc. # 002-11504 Rev. *A
46
Figure A-21. EZ-BLE Connections
The EZ-BLE PRoC Module includes the following connections to PSoC 4000S and KitProg2:
■
UART connections to PSoC 4000S through zero-ohm resistors R28 and R27 (see
Figure A-21
and
Table A-7
). Please note that R28 and R27 are not loaded by default.
■
I2C connections to KitProg2 and PSoC 4000S (see
Table A-7
).
■
SWD connections to KitProg2 through the DPDT switch SW4. The SWD connections are shared
between the PSoC 4000S and EZ-BLE devices.
P1_0
P1_1
/XRES
BLE_XRES
BLE_SCL
BLE_SDA
RESET
I2C_SCL
I2C_SDA
R59
ZERO
R20
ZERO
R17
ZERO
R14
ZERO
R26
ZERO
R58
ZERO
