PSoC® 4000S Prototyping Kit Guide, Doc. # 002-11504 Rev. *A
33
Follow a similar approach to snap the sensor boards from PSoC 4000S board.
Figure A-4. PSoC 4000S Prototyping Board separated into Four Parts
A.1.2.6
Header Connections
The PSoC 4000S Prototyping board supports a number of unpopulated headers on both the
KitProg2 and the target PSoC 4 boards.
Functionality of J1 and J2 Headers (Target Board)
The target board contains two, single in-line headers (J1 and J2). Both are 1×22 pin headers and
include all of the I/Os available on the PSoC 4000S device. These headers support all of the avail-
able ports, GND, VDD, and connections to passive elements and user-input devices. The J1 and J2
headers support 100-mil spacing, so you can solder connectors to connect the target board to any
development breadboard. The CapSense Slider signals and the Slider LED signals from header J1
are routed to header J10 on the sensor board. The CapSense Buttons signals and the Button LED
signals from header J2 are routed to header J9 on the sensors board.
Figure A-5. J1 and J2 Headers
