PSoC® 4000S Prototyping Kit Guide, Doc. # 002-11504 Rev. *A
23
Kit Operation
3. Select the option
Build
>
Build <Project_Name>
, or press
Shift + F6
to build the project as
shown in
Figure 3-4
.
Figure 3-4. Build the Code Example
4. If there are no errors during build, program the firmware into the kit by choosing
Debug
>
Program
or by pressing
Ctrl + F5
as shown in
Figure 3-5
. This programs the device on the
PSoC 4000S Prototyping board.
PSoC Creator has an integrated debugger. You can start the debugger by selecting
Debug
>
Debug
or by pressing
[F5]
. Refer to the
Debugging Using PSoC Creator
section in the
KitProg2 User
Guide
for a detailed explanation on how to debug using PSoC Creator.
Figure 3-5. Programming Device from PSoC Creator
