manualshive.com logo in svg

Cypress CY8CKIT-145-40XX, Manual

The Cypress CY8CKIT-145-40XX is an advanced development platform featuring a powerful microcontroller for easy hardware and software experimentation. This versatile product offers endless possibilities for creating innovative projects. Download the comprehensive user manual for free, exclusively from our website. Explore the full potential of this cutting-edge kit and bring your ideas to life!

Share
Download
background image

PSoC® 4000S Prototyping Kit Guide, Doc. # 002-11504 Rev. *A

41

CapSense Linear Slider

A 5-segment linear slider (SLD0, SLD1, SLD2, SLD3, and SLD4) is provided on a breakout board to
demonstrate the CapSense slider functionality of PSoC 4000S device. All the I/Os used for imple-
menting the CapSense Slider are exposed though the headers J2 and J9.

Figure A-13.  CapSense Slider

A.1.2.9

LEDs

The PSoC 4000S Prototyping board contains 12 LEDs:

■

The amber Power LED (LED2): Indicates that the board is powered from the PCB USB 
connector. This LED will not glow when the board is powered from VDD or VTARG directly.

■

The amber Status LED (LED3): Indicates the KitProg2 status, connected to P1[4] of the KitProg2 
PSoC 5LP device. For more details on the KitProg2 status LED, refer to the 

KitProg2 User Guide

.

■

The blue LED (LED1): This is the user LED, connected to P2[5] of the target PSoC 4000S device.

■

Slider LEDs (LED4, LED5, LED6, LED7, LED8): The LEDs corresponding to five segments of the 
slider are connected to P2[0], P2[1], P2[2], P2[3], and P2[4] of PSoC 4000S device.

■

Button LEDs (LED9, LED10, LED11): There are 3 button LEDs corresponding to 3 buttons. They 
are connected to P3[4], P3[5], and P3[6] of the target PSoC 4000S device.

■

EZ-BLE Blue LED (LED12): This is the user LED connected to P1[6] of EZ-BLE PRoC Module.

Summary of Contents for CY8CKIT-145-40XX


















































Reviews:

No comments

Related manuals for CY8CKIT-145-40XX

Brands by name

Popular brands

Load more brands