PSoC® 4000S Prototyping Kit Guide, Doc. # 002-11504 Rev. *A
47
Use DPDT switch SW4 to switch the SWD connections between PSoC 4000S or EZ-BLE PRoC
Module as shown in
Figure A-22
.
Figure A-22. DPDT switch SW4 to select between PSoC 4000S and EZ-BLE
A.2
Schematics
Refer to the schematic files in the following paths in the installed kit software:
<Install_Directory>\CY8CKIT-145-40XX PSoC 4000S Prototyping Kit\
<version>\Hardware\CY8CKIT-145-40XX Schematic.pdf
A.3
Bill of Materials
Refer to the BOM files in the following paths in the kit software installed:
<Install_Directory>\CY8CKIT-145-40XX PSoC 4000S Prototyping Kit\
<version>\Hardware\CY8CKIT-145-40XX PCBA BOM.xlsx
Table A-7. EZ-BLE Connections
EZ-BLE Connections
EZ-BLE
PSoC 4000S
KitProg2
Description
BLE_TX, P1_5
P0_4
UART_RX
BLE_RX, P1_4
P0_5
UART_TX
BLE_SDA, P5_0
P1_1
P12_1
I2C_SDA
BLE_SCL, P5_1
P1_0
P12_0
I2C_SCL
BLE_SWDIO, P0_6
P12_2
SWDIO
BLE_SWDCLK, P0_7
P12_3
SWDCLK
P0_4
P1_2
GPIO
BLE_XRES
/XRES
P12_4
RESET
BLE_P1_6, P1_6
BLE LED
P4_1
P0_7
User Button