© 2009 Cypress Solutions
Complete Manual: CTM-15X Firmware 1.2.0
(Revision 1.0)
106
6BCommand Reference
The current settings can be queried by using the
smsto
command without parameters.
Examples:
cmd smsto 1235551212
sets the phone number to send the SMS
cmd smsto
returns the phone number this command is set to
A cmd save is required for this command to take effect.
return to list of commands
smsview
Query’s
the message entered via smstext command.
Note: SMS features are only available for specific manufacturer, RF modules, cards or devices. Please
contact Cypress Solutions for a complete list of products that support SMS functionality.
This is a read only command.
Example:
cmd smsview
returns the text message to be sent
return to list of commands
snfdelay [n]
This command sets the store-and-forward delay time. The delay time is the number of seconds the
modem must have a good quality RF connection before stored messages are forwarded. Valid range is 1
to 65535 seconds. The default is 20 seconds.
Note that message forwarding may not occur exactly at the snfdelay interval specified, and stored
messages will only start forwarding when network conditions are deemed acceptable. Example:
1. Set the delay time before forwarding SNF data to 60 seconds
cmd snfdelay 60
A cmd save is required for this command to take effect.
return to list of commands
