© 2009 Cypress Solutions
Complete Manual: CTM-15X Firmware 1.2.0
(Revision 1.0)
116
6BCommand Reference
return to list of commands
wifiwd n [t]
Enable/disable
Wi-Fi watchdog.
n
0 = disabled; 1 = enabled
t
watchdog threshold time in seconds, time must be in range 31 to 65535
(
optional: default
is 120 seconds).
Example:
1. Enable
Wi-Fi watchdog with a 5 minute threshold
cmd wifiwd 1 300
OK
return to list of commands
wpanacktype n
Assigns an acknowledgment type for the Work Alone system.
There are two acknowledgment types:
•
modem
•
server
Note: CTM-15X modem firmware 1.2.0 only supports
modem mode
acknowledgment type.
If a user initiates a ‘Man Down Emergency’ alert, t
he Pendant will provide the worker with either a
positive acknowledgment
or a
negative acknowledgment
.
n = m
modem type acknowledgment (default)
n = s
server type acknowledgment
Entering
wpanacktype
with no arguments returns the current command configuration.
A cmd save and a
power cycle
are required before either mode takes effect.
•
Modem type acknowledgment:
A positive acknowledgment (ACK) means the modem has received the alert. If the Pendant has not
received an acknowledgment from the modem the Pendant will continue to send PANIC/MPANIC
messages until an Acknowledgement
(ACK) is received (Pendant firmware V1.1 and later)
•
Server type acknowledgment:
A positive acknowledgment means that the server has received the alert from the modem and
acknowledged back to the modem then to the Pendant. If the Pendant has not received an
acknowledgment from the server the Pendant continue sending PANIC/MPANIC messages until it receives
an acknowledgement(ACK)(Pendant firmware V1.1 and later)
