© 2009 Cypress Solutions
Complete Manual: CTM-15X Firmware 1.2.0
(Revision 1.0)
46
6BCommand Reference
A cmd save is required for this command to take effect.
See also: gpsrep, gpsdelmes, gpslocport, gpsaddmes, gpsremport, gpsemail, gpssms
return to list of commands
gpsremport n xxxxx
Sets the IP port number of the remote server that the GPS report will be sent to.
Up to 8 GPS reports can b
e configured.
n = 1 to 8 or 11
GPS report number
xxxxx = 0 to 65535
remote port number in decimal
The current IP port configuration for a GPS report can be queried by using
gpsremport n
where
n
is the
report number.
If n is omitted, all reports will be queried.
Examples:
1. Report #1 will be sent to port 5005 on remote IP address set by
gpsremip
cmd gpsremport 1 5005
OK
2. Query the remote port setting of all GPS reports
cmd gpsremport
cmd gpsremport 1 7001
cmd gpsremport 2 4114
OK
A cmd save is required for this command to take effect.
See also: gpsrep, gpsdelmes, gpsaddmes, gpsremip, gpsremport, gpsemail, gpssms
return to list of commands
gpsrep n l r s
Sets the reporting type for each GPS report for the local and remote servers.
n = 1 to 8 or report 11
GPS report number
