© 2009 Cypress Solutions
Complete Manual: CTM-15X Firmware 1.2.0
(Revision 1.0)
98
6BCommand Reference
cmd reptype 2 3 7 1
OK
3. Query the reporting methods for all reports
cmd reptype
cmd reptype 1 3 0 0
cmd reptype 2 3 0 0
cmd reptype 10 0 6 0
OK
A cmd save is required for this command to take effect.
See Also: repaddmes, repdelmes, repemail, replocport, repremip, repremport, repsms
return to list of commands
restore
Restores the configuration to the previously saved version (overwrite any commands not yet saved).
This command has the same effect as a power cycle with regard to the configuration.
Example:
cmd restore
return to list of commands
rmtd iii.iii.iii.iii xxxx
Configures the modem to perform a reverse telnet connection to an IP address and port.
The modem tries to connect periodically until a connection is established.
By default this is disabled with IP 0.0.0.0 and port 0.
iii.iii.iii.iii = 0.0.0.0 to 255.255.255.255
remote IP address. 0.0.0.0 = disabled (default)
xxxxx = 0 to 65535
remote port number. 0 = disabled (default)
The current state of remote reverse telnet setting can be queried by using the
rmtd
command without
parameters
