© 2009 Cypress Solutions
Complete Manual: CTM-15X Firmware 1.2.0
(Revision 1.0)
90
6BCommand Reference
cmd pwrwoe 1 60 c 0
OK
4. QUery the current configured parameters for wake on event
cmd pwrwoe
cmd pwrwoe 0 0 10 0
OK
A cmd save is required for this command to take effect.
return to list of commands
7.1.14
“R” Commands
ratesel n
Sets the required network rate mode (CDMA vs. EV
-
DO) of the device. This command is not valid for
GSM/GPRS/HSPA devices.
Note:
•
Prior to using the
cmd ratesel
command, use cmd mode to verify that the modem is in manual
connection mode=1. Otherwise, use cmd mode 1 to put the modem in manual connection mode.
The
ratesel
command talks directly to the embedded card/module and does not require cmd
save for the setting to be saved.
•
Entering
cmd ratesel
without parameters before setting the command to 0 or 1 will return an
“ERROR”, this is normal operation.
•
ratesel
is valid for Sierra Wireless CDMA/EV
-
DO data devices and modules, and Kyocera
KPC650/KPC680 data devices only
•
The Sierra Wireless AC580 (EV
-
DO revision 0, Cardbus device) only supports
ratesel
n = 2
n = 0
1xRTT only
n = 1
EV
-DO only
n = 2
Auto Rate Select (hybrid mode)
- default
The network rate mode can be queried by entering
ratesel
without parameters.
Examples:
1. Set the network rate mode to 1xRTT only
cmd ratesel 0
OK
