© 2009 Cypress Solutions
Complete Manual: CTM-15X Firmware 1.2.0
(Revision 1.0)
25
5BList of Commands
Message format for CTM15x commands via SMS:
NNNN:<command> <parameters> … NNNN:<command> <parameters> …
(up to 166 characters)
Where:
NNNN
is the last 4 digits of the modem's ESN
<command>
is the command to be executed.
cmd
should not be included in <command> and commands
do not have to be separated by a linefeed (<CR><LF>)
<parameters>
are the parameters for each command
Example: If the last 4 digits of the modem’s ESN are 1234
Two commands separated by a space in SMS message
1234:gpsremip 2 123.456.78.900 1234:save
Three commands separated by <CR><LF> for each line of the SMS message:
1234:gpsremip 2 123.456.78.900
1234:gpsremport 2 15000
1234:save
ULCP configuration
ULCP configuration is performed by sending properly formatted binary messages to port
6100
of the
remotely connected device.
see ULCP Remote Configuration Messages for message format.
6
List of Commands
6.1.1
A
apn
(set carrier access
-
point name) (see pg.
31
)
6.1.2
B
boomreport
(set the boom tracker report)
(see pg.
31
)
6.1.3
C
confupgrade
(configures the modem for automatic configuration capability) (see pg.
32
)
ctmsts
(CTM status)
(see pg.
33
)
6.1.4
D
dir
(set NAM phone number,MDN,MIN) (see pg.
33
)
dout
(digital outputs) (see pg.
34
)
