CY14NVSRAMKIT-001 nvSRAM Development Kit User Guide, Doc. # 002-03522 Rev. *A
11
Kit Installation
3. To install the driver for the Debug and Programming (DAP) port (CN3) of the FM4-U120-9B560
FM4 MCU Evaluation Board, open
\drivers\cmsis-dap
and click
driverinstaller
.
Figure 2-2. Install CMSIS-DAP Driver
When the Windows security dialog pops up, click
Install this driver software anyway
to con-
tinue the driver installation.
4. To install the Flash MCU Programmer required to program the FM4 MCU Evaluation Board with
the nvSRAM firmware (
.srec
file), open
\tools\PCWFM
and click
setup
.
Figure 2-3. Install Flash MCU Programmer
The default installation location is as follows:
Windows 7 (64-bit):
C:\Program Files (x86)\Spansion\FLASH MCU Programmer\FM3
Windows 7 (32-bit):
C:\Program Files\Spansion\FLASH MCU Programmer\FM3
2.2
Uninstall SK-FM4-U120-9B560 Kit Software and Driver
To uninstall the software, go to
Start
>
Control Panel
>
Programs and Features
; select the appro-
priate software package and click
Uninstall
.
2.3
Install CY14NVSRAMKIT-001 DVK Contents
Follow these steps to install the CY14NVSRAMKIT-001 DVK contents.
1. Download the kit software from
www.cypress.com/CY14NVSRAMKIT-001
(see
Figure 2-4
).
Figure 2-4. nvSRAM DVK Software
The CY14NVSRAMKIT-001 Kit Setup executable file installs the kit contents, which include kit
software, firmware, hardware files, and user documents.
2. The kit startup screen appears as shown in
Figure 2-5
.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from